High-purity acids permanently available.
- Typically amortized within 1 year
- Long service life
- Suitable for HNO3, HCL and HF
Produce high-purity acids cost-effectively yourself or recycle them by subboiling HNO3, HCL or HF. The gentle, slow evaporation and metal-free design guarantees the highest final purities.
Typically amortized within 1 year
Long service life
Suitable for HNO3, HCL and HF
Elemental analyses in the ultratrace range require high-purity and expensive ultrapure acids. With the distillacid BOD, you can produce these yourself, always fresh when needed and thus in consistent quality from cost-effective p.a. grades. The gentle, slow evaporation and metal-free design guarantees highest final purities and lowest costs for HNO3, HCl and HF. The system typically pays for itself within the first year.
Starting from p.a. grades yields ultrapure acids with contamination in the sub-ppb range
Multiple subboiling Leads to even purer acids in the sup-ppt level.
Application areas: HNO3, HCL , HF and H2O
System pays for itself within the first year
Less is more
Lower distillation volumes mean higher purity of the acid obtained. In 24 h, one obtains approx. 1.2 L HNO3, 1.1 L HCL , 1.0 L HF or 1.8 L H2O
Long life time
The system consists only of high-purity materials such as TFM™-PTFE, PTFE and PP
|General information||Power||250 W|
|Operating pressure||10 - 20° C below boiling point|
|Material||PTFE / PFA|
|degree of purification||10 - 500 ppt|
|Dimensions||width x length x height||400 x 400 x 590 mm|
|Distillation capacity||H20||75 ml / h|
|HNO3||50 ml / h|
|HCl||50 ml / h|
|HF||42 ml / h|
|Features||programmable time switch|