References for Berghof Reactor Systems
Thanks to the modular design, the unique PTFE lining and easy handling, Berghof reactors offer individual configuration and targeted application options. Find out how our customers benefit from these product advantages.
Reactor technology, that convinces
Why our customers rely on Berghof reactor technology.
High pressure reactor BR-500 with Thermostatic jacket
"Since acquiring the Berghof BR-500 high pressure reactor, our research team has experienced remarkable improvements in efficiency and safety. The reactor is easy to assemble and therefore has streamlined our experimental designs. Its robust case has also ensured reliable operation under challenging conditions. Overall, we are highly satisfied with our purchase, as it has significantly enhanced our capabilities in chemical synthesis and research development."
ETH, Concrete & Asphalt Group, Jan Reger
High-Pressure Reactor BR-700 with PTFE Insert
“After successfully commissioning the BR-700 high-pressure reactor, we are very satisfied with the intuitive controls, quick heating, and robust construction of the device. We also value the close collaboration with Berghof to optimally use the high-pressure reactor according to our requirements.”
Dr. Tobias Bader (Project Manager VDZ Technology gGmbH)
DB-1000 in use at Silantis GmbH
“The PTFE lining and the associated corrosion protection make it ideal for our acid hydrolysis process.”
Silantes GmbH
NR-3000 in use at Hensel Recycling GmbH
“The low-pressure reactor is ideal for recycling fuel cell components, as the simple handling and short reaction time enable efficient recovery of critical raw materials.”
Orhun Dedeci, B.Sc. (R&D Specialist, Hensel Recycling GmbH)
High-Pressure Reactor DB-6000 with PTFE insert in use at SKZ
„The Berghof autoclave with PTFE insert is exactly what we have been looking for. The reactor is easy to operate and is also suitable for use with aggressive media. In addition, the removable PTFE insert is easy to clean and the system is therefore ready for use again in a very short time.“
Dr. Benjamin Baudrit (Vice Managing Director)
NR-6000 Low Pressure Reactor and digestec DAB in use at CeraNovis
„We have been working with the 200ml DAB from Berghof for many years and know these products to be robust and easy to use. It was therefore only natural to use also a Berghof product for scale up to a larger reactor. Following the successful commissioning of the NR-6000, we are very satisfied with its performance and particularly appreciate the uncomplicated control, the fast heating and cooling cycles and the easy filling and emptying.“
Dr. Frank Meyer (CEO CeraNovis)
Micopro GmbH - highpreactor BR-500
„The use of an almost identical system for over 9 years promises the longevity of this reactor design - an important factor in terms of sustainability.“
- Guido Nowak, Engineer (Process technology – MicroPro GmbH)
Universidad de Alcalá - highpreactor BR-40
„The quality and ease of use of the Berghof reactors is perfect for our research project. Indeed, the ability to rapidly set the reactions up using these reactors is a big advantage over some of the other reactors we have previously had. It was also advantageous that we could customize the reactors to our needs and that there are future opportunities to modify the reactors as our research projects and needs change.“
Christopher Whiteoak (Researcher, Universidad de Alcalá, Departamento de química orgánica y inorgánica)
NEMEN UPC - highpreactor BR-300
„The high-pressure reactor has worked excellent under all the experiment conditions tested. Both the easy handling
and the high robustness of the reactor are remarkable, as well as the wide range of applications.“
Prof. Dr. Jordi Llorca (NEMEN, Universitat Politècnica de Catalunya)
Kurita Europe GmbH - highpreactor DB-300
„The complete PTFE lining of the reactor as well as of the sensors for temperature and pressure measurement in combination with the simultaneous stirring have been a crucial factor for our purchase decision of the DB-300 reactor.“
André Schirmer (R&D Specialist, Kurita Europe GmbH)
INCDTIM Cluj-Napoca, Romania - digestec DAB-2
„The autoclaves are easy to handle, while mounting and dismounting of the PTFE liners is straightforward. Moreover, these inserts are resistant under different operating conditions, as well as very easy to clean. Handy and safe – best description for the Berghof vessels.“
Dr. Mihaela D. Lazar (INCDTIM, Cluj-Napoca)
TU Dresden - digestec DAB-2 and DAB-3
„The Berghof autoclaves withstand all conditions. The Teflon inserts are easy to clean and resistant. The easy handling gives us a good feeling, even if syntheses are operated by less experienced students. Results are reproducible, cleaning is very easy and handling is safe“
Sandra Heckel (Simmchen Group, TU Dresden)
PharmaFluidics - highpreactor BR-40, BR-200 and BR-300
„When upgrading our μPACTM column production process from a R&D level to a well-controlled industrial process, Berghof reactors were an essential piece of the puzzle. Ease of operation, robustness, pressure rating up to 200 bar, solvent compatibility together with the possibility to customize the complete setup for the PharmaFluidics process, are key benefits of the Berghof reactors.“
Kurt van Mol (Research Engineer, PharmaFluidics)
Renowned German research institute for applied science -
digestec DAB-2
„The handling of the pressure vessels as well as the mounting of the corresponding Teflon inserts is easy. The vessels are robust and can be exposed to higher temperatures for a long period of time.“
Nadine P. (Project Manager at a renowned German
research institute for applied science)
TU Darmstadt - digestec DAB-2 and DAB-3
„The autoclaves have withstood all experiment conditions tested. Noteworthy are the easy handling and the high robustness of the reactors as well as their wide range of applications regarding different substance classes. The pressure vessel can be opened and closed easily. Thanks to the opening station, it is very easy to insert and remove the PTFE liners.“
Prof. Dr. Marcus Rose (TU Darmstadt, Chemical Technology II)